4006-6061T • 17 Jewels • Automatic Alarm • Two-Tone Custom
This Seiko Bell-Matic received a complete mechanical service and a subtle two-tone transformation, combining its original gold dial with a silver-tone case and refinished details.
The movement was fully disassembled, cleaned using my custom-built watch cleaning machine, and properly serviced before reassembly. [View the watch cleaning machine project →]

Before

After
Disassembly & Inspection




With the automatic winding works removed, a visible haze of old residue and grime covered the movement, along with areas of light surface rust. Further inspection revealed rust inside the cannon pinion, shown below.



The calendar and alarm side showed similar contamination, with accumulated grime and areas of surface rust visible throughout the mechanism.




Cleaning & Reassembly

The movement was fully disassembled for cleaning, allowing each component to be inspected individually before reassembly. After inspection, the parts were cleaned in my custom watch cleaning machine using a three-stage cleaning and rinsing process.
During assembly, the new mainspring unexpectedly sprang free from the barrel. Rather than replace an otherwise undamaged spring, I purchased a Bergeon mainspring winder to properly rewind it and reinstall it into the barrel.


After cleaning, the movement was carefully reassembled and lubricated with Moebius synthetic watch oils at the appropriate lubrication points.



Hand Refinishing & Reluming
The original lume had aged badly, becoming dark and uneven across the dial markers. The deteriorated material was carefully removed and the markers were relumed by hand, restoring a clean and consistent appearance while retaining the original dial.






Casing & Testing

Since the original bracelet was missing several links and was too small to be wearable, I opted to change the case to a stainless steel four-lug version made for the 4006A movement. I kept the original gold-tone alarm pusher and fitted a new silver-tone crown to better match the stainless steel case.


You must be logged in to post a comment.