
BEFORE

AFTER

Opening the case revealed extensive rust and corrosion throughout the movement, leaving several components beyond repair. Many of the damaged parts had to be replaced with components salvaged from a donor movement.



The date corrector button was completely seized by corrosion and had to be removed before the movement could be taken out of the case. Using my staking tools, I carefully pressed the button out of its housing.


Further inspection revealed that the hairspring had broken away from its attachment at the balance cock. The damage made the original balance assembly unusable, requiring a replacement from the donor movement.
The balance lyre spring had also come loose from its retaining position. Since these springs are normally held securely in place, I suspect the watch may have suffered a significant impact, possibly during a trip through a washing machine.


The original plating was removed from the brass case, followed by sanding and polishing to smooth out surface scratches and imperfections. The refinished brass was then prepared for a fresh layer of nickel plating.



After refinishing the brass, I electroplated the case with a fresh layer of nickel to restore its original silver appearance. The newly plated surface was then polished to achieve a smooth, reflective finish.





Following complete disassembly, the movement components were cleaned and inspected for wear and corrosion. Damaged parts were replaced using the donor movement, and the remaining components were carefully reassembled and lubricated.
The original hour, minute, and seconds hands were severely corroded and required replacement. Each replacement hand was carefully prepared and refinished with red enamel paint to create a more distinctive appearance and improve contrast against the dial. Care was taken to achieve a smooth, even finish before installation.


The partially restored Poljot 2614.2H features a refinished and nickel-plated case, replacement hands finished in red enamel, and a cleaned, lubricated, and reassembled movement. A brown leather strap complements the watch’s vintage appearance. Unfortunately, a crack in the original crystal became apparent after polishing. The restoration remains unfinished as I continue searching for a suitable replacement crystal and work toward completing the movement’s final regulation.




You must be logged in to post a comment.